0

Your Cart is Empty

The Chris King ISO AB Torque Cap allows the new ISO AB boost front hub to take full advantage of the new Rock Shox forks.

Not compatible with Boost Centerlock Hubs.



Removal

1. Loosen the adjustment clamp bolt.  This will make removal of the non-disc side easier.

2. Take a long punch, wooden dowl, or similar item, and insert it through either end of the axle.

3. With the tool, press on the inner lip of the insert while holding the shell.  The insert should pop out.

4. Repeat for the opposite side.

 

Installation,

1. Prep the insert and axle by rubbing anti-seize, or assembly lube on the axle/insert interface.

2. Press the insert into the axle.

Sold out

PHB780

Chris King ISO AB Axle Torque Cap



Color
Silver
Black



Availability and stock levels vary by color & specification, please check each color below for stock information.

Notify me when this product is available:

The Chris King ISO AB Torque Cap allows the new ISO AB boost front hub to take full advantage of the new Rock Shox forks.

Not compatible with Boost Centerlock Hubs.


Removal

1. Loosen the adjustment clamp bolt.  This will make removal of the non-disc side easier.

2. Take a long punch, wooden dowl, or similar item, and insert it through either end of the axle.

3. With the tool, press on the inner lip of the insert while holding the shell.  The insert should pop out.

4. Repeat for the opposite side.

 

Installation,

1. Prep the insert and axle by rubbing anti-seize, or assembly lube on the axle/insert interface.

2. Press the insert into the axle.


  • AVT.Bike is an authorized Chris King® dealer and proud to carry one of the largest selections of Chris King products available online and shipped anywhere in the world.
  • Chris King components including hubs, headsets and bottom brackets are available in 9 stock colors.
  • LIFETIME Warranty on all Chris King products.
  • Other colors and product options are available depending on stock levels, so if you don't see the color or exact product you are looking for please contact us.
  • If you have any technical questions at all on Chris King products please contact us and we'll be pleased to help you out!
  • All Chris King products are responsibly manufactured in Portland, Oregon, USA.