Chris King Rear Hub Maintenance Kit for ISO Disc and Classic Hubs
Processing...

Chris King Rear Hub Maintenance Kit for ISO Disc and Classic Hubs

Code: CK-REAR-HUB-MAINT-KIT
Ready To Ship In: 1-3 Days
Ships To: Worldwide
Payments:  
Returns: 60 Day Free Returns

$25.50

Qty

Product Description

•••••

(above image does not represent the contents of any particular maintenance kit)
Congratulations on your purchase of a Chris King Rear Hub!

Chris King hubs are covered by a 5 year warranty.  Besides the occasional adjustment, the only service required is cleaning and lubricating the RingDrive and re-lubricating the bearings.  In normal and dry conditions your hubs should be maintained every 6-12 months, and in wet or muddy conditions every 3 months.

Water is the most common cause of problems with any sealed bearing.  Chris King hubs are designed to operate with some water intrusion, and although the stainless steel bearings will resist water induced corrosion, the lubricant will eventually deteriorate, which leads to premature bearing wear and possible failure. High pressure spray washing, transporting or riding the bicycle in the rain, or submersion in water can lead to lubricant contamination by water. 

If when servicing your bearings you encounter damage, these are the kits you'll need to replace Snaprings and Seals, and the RingDrive Lube is perfect for lubricating any bearings.

As always, consult the owners manual that came with your hub, or visit the Chris King website for questions and procedures.
 


The Rear Hub Bearing Maintenance Kit
Compatible with all Rear hubs except R45.

The kit includes:

  • PHB536 Chris King Seal and SnapRing Kit
  • THB003 Chris King RingDrive Lube, 1.2oz bottle